Custom structures
Agri-PV, canal-top, elevated walkable, seasonal-tilt and anything else the site calls for, designed from the same sections and the same codes.
Application
Agrivoltaic frames with crop clearance, canal-top spans, elevated structures over utilities, module frames for walkways and bus shelters, and seasonal-tilt tables. Send the constraint and we design around it.
Custom structures spec table
Values in square brackets are indicative and confirmed in the design report issued with each quotation.
- Design
- From your constraint: clearance, span, access or load
- Members
- GI C, Z and U sections; hot-rolled where spans demand
- Fasteners
- SS304 nuts, bolts and clamps No site welding
- Steel
- [E250 / S350GD] GI cold-rolled C, Z and U sections IS 2062 / IS 277
- Coating
- GI [275] gsm coil, or HDG post-fabrication [65–85] µm IS 277 / IS 4759
- Design basis
- Site wind speed and terrain per IS 875 Pt.3; member design per [IS 800] Design report supplied with every order
- Warranty
- [25] years structural Warranty document on request
Datasheet, drawings, certificates
The Custom structures datasheet and section drawings are issued with each quotation while the public library is being prepared. Request the datasheet and it will be sent the same working day.
Custom structures questions
- What information do you need for a custom structure?
- A site layout, the module datasheet, the constraint that rules out a standard table, and the soil report if it is ground-founded.
- Do custom structures cost much more?
- The section stock is the same. Cost moves with steel weight and foundation type, which the design report sets out line by line.
Send a layout and we'll size Custom structures for your site.
Drawings and a priced bill of materials back in [3] working days. Or call +91 93478 15712.